Mirth Community

Mirth Community (http://www.mirthcorp.com/community/forums/index.php)
-   General Discussion (http://www.mirthcorp.com/community/forums/forumdisplay.php?f=7)
-   -   Let us know how you're using Mirth! (http://www.mirthcorp.com/community/forums/showthread.php?t=452)

jerchap 01-30-2008 03:05 PM

Re:Let us know how you're using Mirth!
 
Currently evaluating in a test environment to migrate hl7 specific integration from BizTalk. We could potentially be using it for ADT, ORU, etc across our health region and possibly for integration across health regions.

The configuration of channels and hl7 manipulation is much easier than biztalk, but I think Mirth needs some definite work in the following areas:

Every destination connector type should have retry functionality. This should be base functionallity of all connectors, not just LLP. You can't have an enterprise worthy integration solution without this. And yes, I know you can write script in the post processor, but I don't think that is a good solution as it really should be baked into the product by default. Also, retry count should go above 99.

Documentation. I haven't seen any. I haven't seen any user/developer documentation. I'm also looking for architectural documentation that can satisfy me of the robustness of Mirth. For example if the machine loses power while messages are being processed (transformed, etc) will the be lost or will they be delivered once the machine comes back up. Can mirth gaurantee delivery, and if not under what circumstances?

lyratech 02-13-2008 02:58 PM

Re:Let us know how you're using Mirth!
 
I wish I had better luck than others...

trying to use Mirth taking HL7 via LLP and writing to a JMS queue on JBoss. Mirth 1.7 appears to have an issue getting that working -- too bad. Would appreciate some docs on the topic.

jbartels 02-14-2008 07:48 AM

Re:Let us know how you're using Mirth!
 
lyratech wrote:
Quote:

I wish I had better luck than others...

trying to use Mirth taking HL7 via LLP and writing to a JMS queue on JBoss. Mirth 1.7 appears to have an issue getting that working -- too bad. Would appreciate some docs on the topic.
Post up in the support forum with details on what you're trying to accomplish.

One of the reasons that my team, and I think a lot of other people, have gotten Mirth to work for them is not good documentation (although that would be nice! :P ), its a really knowledgeable community thats eager to help.

issdaw 04-14-2008 05:30 AM

Re:Let us know how you're using Mirth!
 
We are using mirth 1.6.1.2750 to integrate a Dynamic Imaging PACS system to Meditech client server.

Mirth saved a us a lot of time and money as we were able to do all the HL7 interfacing ourselves. The system has been live for 2 months with no problems reported.

Many thanks to the Mirth Devs and the community.

Steve.

julianrobt 09-25-2008 10:26 PM

Re: Let us know how you're using Mirth!
 
EDIT - julianrobert, *start a new topic* and ask your question again.

Post edited by: jbartels, at: 09/26/2008 11:18

brendanh 09-26-2008 11:19 AM

Re: Let us know how you're using Mirth!
 
Or search...there are hundreds of posts about this already.

rsconyers 11-21-2008 10:40 AM

Re: Let us know how youre using Mirth!
 
I am a consultant working with an Anatomic Lab considering interface engines. I am familiar with Seacoast and as a matter of fact to use to work for John Herring. I would love the opportunity to discuss your use and or plans to deploy with your customer EMRs. How might I contact you. Thanks

csmith 06-23-2009 10:36 AM

Hi,

We use Mirth Connect in conjunction with OpenClinica, both to upload data and to report out results. We're very pleased to say the least.

Thanks

daveylin 08-19-2009 11:02 AM

Thanks for all the support on the forums!

We are currently using Mirth to modify hospital lab feeds. We have a lab, radiology and transcription interface going into the NextGen EMR but the NextGen EMR uses a simple file parser. Using Mirth we are able to move fields around and edit certain fields getting around the shortcommings of the NextGen Rosetta parser.

supertoms 08-24-2009 04:15 AM

Hi, I work for a big hospital in Italy. I use Mirth 1.8 to integrate our distributed ECG system and demographic data for patients.
Medical Users use send the ecg file in xml, with just a couple of information taken with a bar code scanner (Medical Record number and user id).
With Mirth I made a channel that use those informations as keys for db queries and complete the ecg with patient name, date of birth, department name ...
I'm also studying and testing more integrations.


All times are GMT -8. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Mirth Corporation